Epoxy Flooring in Little Chute, WI

Little Chute is building, and much of our epoxy flooring in Little Chute goes onto young concrete. Census survey data for 2019 to 2023 puts the village's median home at 1986. 16.7% of housing units were built from 2010 to 2019, and another 3.8% in 2020 or later. Housing units rose from 4,376 in 2010 to 5,130 in 2020, and the population grew 11.2% to 11,619.

Why new slabs need a plan

Owners of new homes often want the garage coated right away, before the first winter. That is a good instinct. It is also where timing matters most.

• Fresh concrete holds water. A new slab keeps drying for weeks. Coating it too soon can trap moisture and cause blisters. We ask when the floor was poured and test the slab before scheduling.
• Smooth finishes repel coatings. New garage floors are power troweled to a slick finish and may carry a cure-and-seal product. We grind both off.
• Shrinkage cracks show up early. Hairline cracks often appear in the first year. We fill them before coating so they are less likely to show through.

Getting ahead of the first salt season

The best time to coat a new garage is before it ever sees road brine. Once salt water soaks into bare concrete through a winter, the surface can start to scale and the salt stays in the pores. A coating applied in late summer or early fall, after the slab has dried enough, keeps that first winter's slush on top of the floor. If you are building now, ask us about timing before you move in.

Get a Free Estimate

Older Little Chute floors too

The village is not all new. Dutch Catholic settlers from North Brabant began arriving in 1848, and the older streets near the river and Main Street have homes from many decades. About 8.8% of housing units date to 1939 or earlier. Those floors get the full older-slab treatment: paint removal, patching and moisture testing.

A note for renters and landlords

About 58.2% of Little Chute's housing units are owner-occupied, so a good share are rentals. Landlords coat garage and basement floors because a sealed surface cleans up fast between tenants and does not hold oil stains. A solid color or flake epoxy with a clear topcoat is a practical choice.

Basements in new Little Chute homes

New homes often have an unfinished basement with a slab that has never been touched. That is an easy floor to coat well, once it has dried. Moisture still matters here, because new concrete and new backfill both hold water for a while. We test, wait if we need to, and then coat. A coated basement floor makes it simple to add a gym, play area or storage before you finish the walls.

What we install here

• Flake epoxy garage floors
• Polyaspartic floors for fast turnaround
• Basement coatings after moisture testing
• Metallic epoxy for finished lower levels
• Shop epoxy for workshops and small businesses

Call (920) 587-7291 and we will check your slab and give you a written price.